Brivis Contour Evaporative Cooling Range

From $ 2,898.00 *

- enquire about this product -

Brivis Contour Evaporative Cooling Range

$ 2,898 *

Enquiry form

Fields marked with a * are required
X

Product Description

Exclusively Brivis, the Contour has the lowest profile and is one of the most advanced evaporative coolers in its class – designed to deliver volumes of cold air without the profile of traditional coolers. Every stage of its operation has been designed to make it reliable and discreet. When you turn your cooler on, the Brivis Contour begins its Pre-Wet cycle. Clean fresh water enters the cooler and begins soaking the cooling pads before the fan starts, ensuring that you will only be provided with cool fresh air. It is packed with features to give you comfort and flexibility. Exclusive to Brivis, our leading edge AquaSave technology saves you up to 45% on water consumption when compared to conventional bleed systems. The AquaSave cleans the water used in the cooling process avoiding any unnecessary wastage. The Brivis Contour also has one of the smallest water reservoirs on the market, holding up to a third the amount of water than other coolers, minimising the amount of water discharged when the cooler is turned off. The innovative sloping base allows the cooler to sit lower on the roof than any other cooler. The Brivis designed super quiet direct drive fan delivers the cool air you need, while the SynchroDrive Pump sits in its own waterproof chamber and is designed to be self cleaning by spinning in the opposite direction to clear blockages, if they occur. Little maintenance, peace of mind. The Brivis Contour ServoSeal is the only motorised winter seal on the market. When closed, the ServoSeal eliminates drafts and retains warmth in your home on cold days. When open, it manages the airflow reducing turbulence and noise. The perfect choice when you have a Brivis Gas Ducted Heater.






FeaturesThe lowest on your roof: Brivis is proud to give you a ducted evaporative cooling system that will match not only your needs but also your tastes. The Brivis Contour Cooler is the least obtrusive evaporative cooler in Australia. Its sloping base offers the lowest profile on your roof, which is ideal if you want to maintain the look of your home. The Brivis Contour is also available in the five most popular roofing colours in Australia. That is Terra Red, Charcoal, Beige, Rivergum and Chocolate

The most advanced technology: The Brivis Contour Cooler has unique features that make it far more effective at cooling your home than other coolers, while requiring the least amount of water and maintenance. Every stage of the Brivis Contour's operation has been designed to make it reliable, discreet and healthy for you. When you turn your cooler on inside the home, the Brivis Contour begins its Pre-Wet cycle. Clean, fresh water enters the cooler and begins soaking the cooling pads before the fan even starts, ensuring that you will be provided with cool fresh air immediately the fan starts. It is packed with features to give you comfort and flexibility.

The shape of the Brivis Contour's base means it holds up to a third less water than other coolers, saving valuable water during the hot Australian summer months.

The SynchroDrive Pump: The SynchroDrive Pump sits in its own waterproof chamber and is designed to be self-cleaning by spinning in the opposite direction to clear blockages, if they occur. This ducted evaporative air conditioning system is as close to self-maintaining technology as you’ll get, giving you more time relax or do what you need to do at home in comfort .

The Aqua-Duct: The water is pumped into the unique Brivis Aqua-Duct. With large channels and drain holes, every pad is saturated, evenly and quickly. Once the pads are saturated, the fan turns on.

The Brivis Contour has a variable speed fan which gives you a wide range of speeds and allows the cooler to run much slower than other coolers. This is great on a hot night when all you want is a gentle breeze to keep you cool so you can get to sleep.

The ServoSeal: The air is pushed from the fan through the unique Brivis Contour ServoSeal and into the ductwork in your ceiling. The ServoSeal is the only motorised cooler seal on the market. The ServoSeal retains warmth in your house on cold days when it's closed, and when open, it manages the airflow, reducing turbulence and noise.

The Trident: The Brivis Contour uses the Trident Water Sensor to manage water levels in the tank. When you turn your cooler off, the Brivis Contour automatically runs a Fresh Start operation. The tank is emptied and thoroughly flushed clean, which means there is no dirty water or sediment sitting in the cooler before it starts up again.

Guaranteed to last: The Brivis Contour Cooler is designed and made in Australia to withstand our variable and often harsh climate. The plastic housing is made of a tough UV-stabilised plastic to resist the sun's rays and is designed for strength and durability. The Brivis Contour's high tech electronics are easy to access and are kept dry in a safe, waterproof casing for added longevity.
RemoteRequired
ColourCharcoal
Terra Red
Beige
Rivergum
Chocolate

FeaturesThe lowest on your roof: Brivis is proud to give you a ducted evaporative cooling system that will match not only your needs but also your tastes. The Brivis Contour Cooler is the least obtrusive evaporative cooler in Australia. Its sloping base offers the lowest profile on your roof, which is ideal if you want to maintain the look of your home. The Brivis Contour is also available in the five most popular roofing colours in Australia. That is Terra Red, Charcoal, Beige, Rivergum and Chocolate

The most advanced technology: The Brivis Contour Cooler has unique features that make it far more effective at cooling your home than other coolers, while requiring the least amount of water and maintenance. Every stage of the Brivis Contour's operation has been designed to make it reliable, discreet and healthy for you. When you turn your cooler on inside the home, the Brivis Contour begins its Pre-Wet cycle. Clean, fresh water enters the cooler and begins soaking the cooling pads before the fan even starts, ensuring that you will be provided with cool fresh air immediately the fan starts. It is packed with features to give you comfort and flexibility.

The shape of the Brivis Contour's base means it holds up to a third less water than other coolers, saving valuable water during the hot Australian summer months.

The SynchroDrive Pump: The SynchroDrive Pump sits in its own waterproof chamber and is designed to be self-cleaning by spinning in the opposite direction to clear blockages, if they occur. This ducted evaporative air conditioning system is as close to self-maintaining technology as you’ll get, giving you more time relax or do what you need to do at home in comfort .

The Aqua-Duct: The water is pumped into the unique Brivis Aqua-Duct. With large channels and drain holes, every pad is saturated, evenly and quickly. Once the pads are saturated, the fan turns on.

The Brivis Contour has a variable speed fan which gives you a wide range of speeds and allows the cooler to run much slower than other coolers. This is great on a hot night when all you want is a gentle breeze to keep you cool so you can get to sleep.

The ServoSeal: The air is pushed from the fan through the unique Brivis Contour ServoSeal and into the ductwork in your ceiling. The ServoSeal is the only motorised cooler seal on the market. The ServoSeal retains warmth in your house on cold days when it's closed, and when open, it manages the airflow, reducing turbulence and noise.

The Trident: The Brivis Contour uses the Trident Water Sensor to manage water levels in the tank. When you turn your cooler off, the Brivis Contour automatically runs a Fresh Start operation. The tank is emptied and thoroughly flushed clean, which means there is no dirty water or sediment sitting in the cooler before it starts up again.

Guaranteed to last: The Brivis Contour Cooler is designed and made in Australia to withstand our variable and often harsh climate. The plastic housing is made of a tough UV-stabilised plastic to resist the sun's rays and is designed for strength and durability. The Brivis Contour's high tech electronics are easy to access and are kept dry in a safe, waterproof casing for added longevity.

RemoteRequired

ColourCharcoal
Terra Red
Beige
Rivergum
Chocolate

Brivis Evaporative Cooling Brochure